Kyosho MINI-Z Racer MR-015 RM Type/ AWD MA-010 Type Instruction Sheet

Before beginning assembly, please read these instructions thoroughly.
MINI-Z Racer MR -015 RM Type / AWD MA -010 Type
AUDI TT Coupe 3.2 Quattro
Tools : Must be prepared.
1
Preparation of Chassis
Motor mounting position
MR-015
MA-010
Front Body Mount
TP
2 x 5mm
2
Chassis
MZN77-T01
*Cutter Knife.
*Nippers
Assemble the chassis as shown below.
Rear Mount Type (RM Type)
Replace the front body mount
with the one included in the set.
Caution : Do not screw-in excessively.
BODY SET
+
*A Phillips Screwdriver (Precision type or a small sized)
Adjustment of Wheelbase
Receiver Antenna
2x5mm
Front body mount.
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MZN77
+
Wheelbase (M)
90mm
90mm
Bend the receiver antenna
as shown below.
Receiver Antenna
15mm
R