TRENDnet AC1750 User Manual page 18

TRENDnet User's Guide
3. To save changes to this section, click Apply when finished.
• Multiple SSID: Select which SSID you would like to configure. The Wireless Name
(SSID) will be blank if additional SSID's have not been configured. This router
supports 3 additional SSIDs.
Note: You will need to use one of the additional SSIDs to configure as your guest
network. Please refer to Wireless 2.4GHz Guest Network section for more
details.
• Radio On/Off:
o On: Turns on wireless radio
o Off: Turns off wireless radio.
• 802.11 n-mode
o Auto: Router will only operate in 802.11n mode only
o Off: Select this option if you have non 802.11n wireless clients (802.11b/g).
When applying the 802.11 mode setting, please keep in mind the following:
• Wireless devices that support 802.11n are backwards compatible and can connect
wirelessly at 802.11g or 802.11b.
• Connecting at 802.11b or 802.11g will limit the capability of your 802.11n
supported wireless devices from obtaining higher performance and data rates.
© Copyright 2013 TRENDnet. All Rights Reserved.
• Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.
• Wireless devices that only support 802.11b or 802.11g will not be able to connect
to a wireless network that is set to 802.11n only mode.
• Wireless devices that only support 802.11b will not be able to connect to a wireless
network that is set to 802.11g only mode.
• Wireless Name (SSID): This acronym stands for Service Set Identifier and is the
name of your wireless network. It differentiates your wireless network from others
around you. By default, the router's wireless name is unique to the device. the
wireless network name. If you choose to change the SSID, change it to a name that
you can easily remember.
• Broadcast Network Name (SSID):
o Enabled allows wireless devices to search and discover your wireless network
name (also called SSID) broadcasted by your router.
o Disabled turns off the ability for wireless devices to find your network. It is still
possible for wireless devices to be configured to connect to your wireless
network.
• Frequency (Channel): To manually set the channel on which the router will
broadcast, uncheck Auto Channel, then click the drop-down list and select the
desired Channel for wireless communication. The goal is to select the Channel that
is least used by neighboring wireless networks.
• Channel Bandwidth: Select the channel bandwidth you would like the router to
operate in. For greater performance, select 40MHz.
TEW-812DRU
18