How To Use The Kitchen Timer; How To Time A 3-Minute Phone Call; Using A Holding Time/Programming Delayed Cooking; How To Defrost, Hold And Micro Cook - GE JVM290 Use And Care Manual

HOW TO USE THE KITCHEN TIMER
The Kitchen Timer
The Kitchen Timer has 3 timing functions:
• It operates as a minute timer.
• It can be set to delay cooking.
• It can be used as a hold setting after defrosting.
The Kitchen Timer operates without
microwave energy.
Using a Holding Time
The Kitchen Timer can also be used to program a
"holding time" between microwave cooking functions.
The time can range from 1 second to 99 minutes and
99 seconds. A holding or standing time may be found
in some of your own recipes or in a cookbook.
How to Time a 3-Minute Phone Call
Step 1: Touch KITCHEN TIMER pad.
Step 2: Touch number pad 3 and MINUTE pad
(for 3 minutes and no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch either MICRO COOK, TEMP COOK/HOLD
or ROAST and enter cook time or temperature. Touch
KITCHEN TIMER and enter number of minutes to
delay cooking. When delaying Temp Cook/Hold or
Combination Roast cooking, be sure probe is in
food. Touch START. Timer will count down to zero
and cooking will begin.
How to Defrost, Hold and Micro Cook
Let's say you want to defrost a frozen casserole for 15
minutes, hold for 10 minutes and then Micro Cook for
25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
_ Step 2: Touch TIME DEFROST pad.
TIME
l
DEFROST
Step 3: Touch pads 1, 5 and MINUTE for 15 minutes
defrosting time. (Defrosting is automatically set
on power level 3 but can be changed by touching
the POWER LEVEL pad and the desired power
level 1-10.)
] Step 4: Set standing or hold time by
KITCHEN
touching KITCHEN TIMER pad.
TIMER
Step 5: Touch 1, 0 and MINUTE to hold for
10 minutes.
MICRO ] Step 6: Touch MICRO COOKpad. COOK
Step 7: Touch 2, 5 and MINUTE for 25 minutes of
cooking time.
Step 8: Touch START. As each function is
automatically performed, oven display
shows instructions entered and the function.
When time is up, the oven signals and
flashes "End."
13