In Case Of Trouble - Daewoo DW-3610 Instruction Manual

Washer-spindryer
Hide thumbs Also See for DW-3610:
Table of Contents

Advertisement

Dirt may also collect underneath the pulsator.
Clean out occasionally by:
§ Remove the screw located in the center of the pulsator.
§ Hook the pulsator and pull upwards.
§ Wiping clean the bottom of the
washer tub.
(When replacing the pulsator, make
sure that screw is firmly tightened)
When opening and closing the inner lid, make sure to pull it toward you.
CAUTION: For your safety, do not put your hands into spin basket until it
has stopped spinning completely.

IN CASE OF TROUBLE

Please check the following. Unplug the power cord from the socket
before checking.
1. If the washer will not start:
§ Check whether the house circuit breaker is tripped or a fuse is blown.
Check whether the power cord is connected to the socket properly.
Check whether something is preventing the pulsator from rotation.
Check whether the belt is attached properly.
(Check by removing rear cover0
2. If there is excessive noise:
§ Check whether something is touching the pulsator as rotates.
Check whether the machine is placed level on the floor.
Check whether there is an excessively unbalanced load in the spin basket while
spinning.
8

Advertisement

Table of Contents
loading

Table of Contents