Toshiba wt200 User Manual page 60

Owner String
This blank field is used to display a message when the password field is
displayed on startup. If a password is not registered the message will not
be shown.
Display
This tab lets you customize your computer's display settings for either the
internal display or an external monitor.
Power On Display
This tab allows you to select the display to be used when the computer is
started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
The Power On Display is supported with some models.
Auto-Selected
System LCD Only
Boot Setting
This function allows you to modify the boot settings.
Boot Speed
This tab allows you to select boot-up speed.
Fast
Normal
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the Legacy USB Support item to enabled.
Enabled
Disabled
User's Manual
Selects an external monitor if one is connected,
otherwise, it selects the internal display. (Default)
Selects the internal LCD, even if an external
monitor is connected.
Reduces system boot-up time. System can boot
only from the built-in SSD and only internal LCD
and keyboard are supported during the boot
process.
System boots up at normal speed. (Default)
Enables the USB Legacy Emulation. (Default)
Disabled Disables the USB Legacy Emulation.
TOSHIBA WT200
4-12