Advertisement
5 5 û
Function
Turn Unit On & Off
Adjust Temperature Set-Point
Display "Actual" Temperature
Select °F or °C Display
Black-Out Mode
Display Lighting
Sabbath Mode
TruProtect™ System
Door Ajar Alarm
High/Low Temp Alarm
Power Failure Alarm
Reset Alarms
Disable/Enable TruProtect™
û
Pressing and holding the
To adjust temperature set-point, press the
mode, a "SET" icon will be displayed. Pressing either the
on the display pad will raise or lower the set temperature by one (1) °F or °C (depending
on your setting).
Display represents "real-time" temperature of each compartment's stored wine and/or
contents. Some minor temperature fluctuation around your desired set-point is normal.
˚
F/C
Pressing the
key will toggle the display between Fahrenheit and Centigrade
temperature display.
Display automatically shuts off when the door is closed.
Display lighting can be enabled with the door closed by pressing the
Press and hold the
key while pressing the
SET
System monitoring is automatically enabled unless system has been shut off (see below).
N/A
NOTE: This alarm may occur when changing set-points in excess of 10 °F, and/or high
usage, this is normal.
NOTE: This alarm may occur upon initial installation since the unit was run at the factory
to verify quality, this is normal.
Close door to reset "DOOR AJAR" Alarm. Press the
Press and hold the
key for five (5) seconds to enable or disable the TruProtect™
SET
System.
û
Function Access
ON
key for 5-seconds will turn the unit "ON" or "OFF".
OFF
key. When a compartment is in "SET"
SET
˚
F/C
key four (4) times in seven (7) seconds.
ON
Hi/Low Temp Upper
Hi/Low Temp Lower
or
keys located
WARMER
COLDER
key.
LIGHT
ON
key to reset all other alarms.
OFF
Advertisement
