Backlit Blue Lcd Display; Call Pick Up; Call Timer; Caller Id And Call Waiting Caller Id (Type 1 & Type 2) - Xblue Networks X16 User Manual

Backlit Blue LCD Display

Each digital telephone endpoint (speakerphone) comes equipped with a backlit
display, which can be programmed to go into power saver after it has being idle
for 60 seconds. The backlit display is immediately activated whenever an action
such as ringing, going off hook or pressing any of the fixed or preprogrammed
buttons, is taken.

Call Pick up

There are two types of call pick up, intercom and CO Line. In both cases, the
telephone that has the call picked up from must be ringing.
Intercom – When one extension calls another extension, but the called
party is not there, the calling party presses the
If the extension user of the called party hears their extension ringing,
they may press the
the actively ringing call.
CO Line – Transferred Telephone Company Lines can be picked up by
another extension by press the
- When the
up.
- When the
picked up.

Call Timer

When making or receiving a call the backlit display shows the time that the call
has been connected in four digit format (00:00). If the call exceeds 99 minutes
and 59 seconds (99:59) the timer will begin again.
Caller ID and Call Waiting Caller ID (Type 1 & Type 2)
The telephone company offers two types of caller ID; type 1 and type 2. Type 1
caller ID presents the caller‟s name, number (when available) and the date and
time of each call. Type 2 incorporates all of the features of type 1 plus it adds
call waiting, caller ID. The system will automatically begin working with caller ID
when the user subscribes for the telephone companies Caller ID service, and it
will set the system‟s time and date.

Caller ID Enable/Disable

Caller ID can be enabled or disabled at each telephone endpoint (speakerphone).
When disabled, the extension will not receive or have access to Caller ID. When
Caller ID is disabled, and the button is pressed, a tone will be heard indicating
that Caller ID is not accessible.
Issue 2

key on any other telephone endpoint and pick up

key on their telephone endpoint.

key is pressed the first ringing extension will be picked

key is pressed the first transferred CO Line will be

key to activate ringing.
29 -
-