Updating The Bios - Dell Venue 11 Pro User Manual

Option
Trusted Execution
Table 15. Wireless
Option
Wireless Device Enable
Table 16. Maintenance
Option
Service Tag
Asset Tag
Table 17. System Logs
Option
BIOS events
Power events

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For tablet, ensure that the battery is fully charged and connected to a power outlet
1. Re-start the tablet.
2. Go to dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, you can select your product from the products list
under the General Support.
5. Choose the Product Type from the list.
6. Select your product model and the Product Support page of your product appears.
7. Click Get Drivers and click View All Drivers.
The Drivers and Downloads page opens.
54
Description
This option specifies whether a Measured Virtual Machine Monitor
(MVMM) can utilize the additional hardware capabilities provided by Intel
Trusted Execution Technology. Default: disabled
Description
Allows you to enable or disable the wireless devices
• WWAN (Default Enable)
• WLAN / WiGig
Description
Displays the service tag of your tablet.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Description
Displays the system event log and allows you to clear the log.
• Clear Log
Displays the power event log and allows you to clear the log.
• Clear Log