Step 4.
Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 5.
Remove the screw that secures the optical drive to the chassis.
Step 6.
Slide out the optical drive as shown.
Step 7.
Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk.
4 5
Step 8.
Separate the cover from the defective optical drive.
Step 9.
Install the new optical drive as follows:
1
3
2
.
Chapter 8
Replacing hardware
29