Table of Contents
Advertisement
Auto Cook Codes
Auto Cook codes 1 through 8
are designed to give you easy
automatic results with a number
of foods,
Code 1, designed for reheating
foods quickly, turns the oven off
automatically as soon as the sensor
detects steam from the foods.
Example:
Step 1:
Place covered food in oven.
Touch AUTO COOK pad. "ENTER
COOK CODE" flashes on display.
Step 2: Touch number pad for
desired code. "CODE 2" shows.
After 4 seconds, "START" flashes
on display. Touch START.
How to Adjust Auto Cook Codes to Suit Your Taste
simply adding a 1 after any Auto Cook code
By
number, you can set the oven to cook for 2070 less
time than the code would regularly provide.
For example, if code 5 cooks your chicken more done
than you like it, set code 51 next time and you'll get
20% shorter cooking time.
Example:
Step 1: Touch AUTO COOK pad.
Step 2: Touch number pads 5 and 1
in that order. "AUTO CODE 4"
shows and after 4 seconds "START"
flashes on display.
When codes 2 through 8 are
selected, the oven determines how
much additional cooking time is
needed after steam has been sensed,
automatically switches to TIME
COOK and signals. The word
"AUTO" on the display is then
replaced by countdown numbers
indicating remaining cooking time.
When the signal is heard, the oven
door may be opened for stirring,
turning or rotating food.
Word "AUTO" shows
on display, indicating
steam sensor is
activated. DO NOT
OPEN DOOR.
OPENING DOOR
MAY AFFECT COOKING PERFORMANCE.
Beep sounds when
by cook time. Rotate or
stir food, if necessary.
When done, oven beeps
every minute until door is opened or CLEAWOFF
is touched.
If you want a longer cooking time than a code
provides, add a 9 after the code.
For the chicken in the example at left, code 59 would
provide 20% longer cooking time than the regular
code 5 would provide.
START
A guide behind the oven door lists
cooking codes for frequently
prepared fresh or uncooked foods
and appropriate codes are
recommended in the cooking guide
in the Automatic Cooking section.
I
COOK
COOK
Step 3: Touch START. "AUTO"
shows on display. DO NOT OPEN
DOOR until first oven signal, then
rotate dish 1/2 turn if necessary.
Close door and touch START to
finish cooking.
~/
23
Advertisement
Table of Contents
