Table of Contents
Advertisement
KOR-861G6(¿ ) 02.5.20 1:23 PM ˘ ` 11
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power
ever goes off, the display shows " : 0" when the power comes back on.
CLOCK
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating
defrost and stand times by cycling on and off.
DEFROST
When you touch START pad, the DEF indicator starts blinking to show the oven is in the DEF mode. The
display counts down the time to show you how much defrosting time is left in the DEF mode.
The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When the
defrosting time ends, you will hear 3 beeps.
1. Touch CLOCK pad.
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
touching the numbers
in sequence.
4. Touch CLOCK pad.
1. Touch DEFROST pad.
2. Touch number pads for the desired
defrosting time.
3. Touch START pad.
NOTE : This oven has multiple clock
systems. If you want 12 hour clock
system, omit this step.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system,
this digital clock allows you to set from 1:00 to
12:59. If you selected 24 hour clock system, this
digital clock allows you to set from 0:00 to 23:59.
The DEF indicator lights and " : 0" is displayed.
The display will show what you touched.
Note : Your oven can be programmed for
59 minutes 99 seconds. ( 59 : 99 )
11
Advertisement
Table of Contents
