GE JE1465K Use And Care Manual page 11

Popcorn
Note:
Use of the metal Double-Duty
shelf with Popcorn program
is N~ recommended.
Step 1: Remove the outer wrapper
from the microwave popcorn.
Step 2: Open oven door and place
package of popcorn in the center of
the oven floor as directed bv the
manufacturer's instructions. Close
oven door.
Step 3: Touch POPCORN pad.
"POP" flashes. After 4 seconds,
"START" flashes on display.
Step 4: Touch START. The popcorn
sensor automatically calculates the
cooking time.
After the popcorn sensor detects
steam, the oven signals and
switches to Time Cook for the
remaining cooking time needed.
TM
5: When cooking is
Step
completed, the oven signals and
flashes "End:' Open the door and
remove the popcorn.
How to Adjust the
POP Program to
Provide a Shorter or
If your favorite popcorn is not
completely popped, there is a
simple adjustment you can make.
Touch the POPCORN pad and then
touch number pad 9. The word
"POP" will appear on the display
with a plus sign beside it. The plus
sign indicates 20 seconds more
cooking time is being provided.
If your favorite popcorn is over-
cooked, there is another
adjustment you can make.
Touch the POPCORN pad and then
touch number pad 1. The word
"POP" will appear on the display
with a minus sign beside it. The
minus sign indicates 20 seconds
less cooking time is being provided.
11
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn't done. What happened?
A. Since house power varies due
to time or location, many Time
Cook recipes give you a time range
to prevent overcooking. Set the
oven for minimum time, test the
food for doneness, and cook your
food a little longer, if necessary.
I
Q. touched the number pads
and selected my power level. When
oven didn't come on. Why not?
A. The TIME COOK I & II pad
must be touched before setting the
number pads or else your oven will
not begin cooking.
Q. I want to cook on a power
level other than High. What do I
need to do?
A. To cook on a power level other
than High, first touch the TIME
COOK pad and set the desired
cooking time. Then touch the
POWER LEVEL pad. "POWER 10'.
appears on the display panel. Enter
new power level number and touch
START.
Q. Can I interrupt my Time
Cook function to check the food?
A. Yes. To resume cooking,
simply close the door and press
the START pad. The timer must be
reset for cooking to resume unless
time is remaining on timer.
Q. I opened the door to check on
the popcorn and "Error"
appeared on the display. Why?
A. The Popcorn program first
detects steam and then switches to
Time Cook. If you open the door
while "POP" is displayed, "Error"
will appear. Close the door, touch
CLEAR/OFF and begin again. You
may open the door when "End"
appears on display.