Common Interface - Philips 26PFL4007H/12 User Manual

Set secured connection with WPS
encryption
1. To set the secured connection with a PIN
code, select the [WPS pin] and press OK.
2. Write down the 8-digit PIN code shown
on TV and enter it in the router software on
your PC.
See the router manual for where to enter
the PIN code.
Set secured connection with WPA
encryption
If your router has WPA (WiFi Protected
Access) security, enter the pass phrase with
the remote control.
1. To enter the encryption key (the security
key) manually, select [Standard] and press
OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
Set secured connection with WEP
encryption
If your router has WEP security, the TV asks
for the WEP encryption key in hexadecimal
numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of of
the first key in the WEP keys list.
2. Enter the security key on the TV with the
remote control to connect to the router.
3. If prompted, agree to the End User
Licence Agreement.
TV network name
If you have more than one TV in your home
network, you can rename this TV to give it a
unique name.
1. Press > [Setup] > [Network settings],
and select [TV network name].
2. To enter the name, press OK to open the
onscreen keyboard or use the remote
control keypad.
EN 54

Common interface

What you can do
You can watch scrambled digital TV channels
with a Conditional Access Module (CAM).
After the CAM is inserted and subscription
fees are paid, you can watch the programme.
This TV supports CI as well as CI+. CI+
supports premium HD digital programmes
with a high level of copy protection.
Note: The applications, functions, content
and onscreen messages depend on the CAM
service provider.
What you need
Caution: To protect the CAM from damage,
insert the CAM as instructed.
Note: Refer to the documentation from
your service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
to insert the CAM into the Common
Interface slot at the side of the TV.
Push the CAM in as far as it will go.
3. Switch on the TV, then wait for the CAM
to be activated. This takes a few minutes.
To maintain access to encrypted digital TV
channels, leave the CAM in the slot.
Watch CAM services
1. After inserting and activating the CAM,
OPTIONS.
press
2. Select [Common interface], then press
OK.
3. Select the CAM provider, then press OK.