Page 2
AND the ambient light is low enough. See also Model Select Buttons below. MODEL SELECT BUTTONS: There is no need to set any special codes when using the BR2 remote with Bryston’s BCD-1 CD player, BDA-1 stand-alone D/A converter or BDP-1 digital player. When using the BR2 remote with Bryston preamps and integrated amplifiers use the model specific codes above. PROGRAMMING/CONTROLLING the B100/BP16 via the BR2 REMOTE CONTROL: Press and hold the CODE button on the remote control until the red LED flashes and release it when the LED remains steadily lit. Then enter the 3 digt code as listed below before the LED goes off. The LED will flash to confirm transmission and then extinguish. 001: select analog source 1 (A/D) 019: balance left 082: select digital source 2 (D2)
PROGRAMMING THE BCD-1 via the BR2 REMOTE CONTROL: Press and hold the CODE button on the remote control until the red LED flashes and release it when the LED remains steadily lit. Then enter the 3 digt code as listed below before the LED goes off. The LED will flash to confirm transmission and then extinguish. Code 242: To enable toggling the display ON or OFF. After entering code 242 the zero button can be used to toggle the display on or off. Reverse this procedure to deactivate this display on/off function Enable or disable the External (remote) Trigger:...
Page 4
APPLICABLE KEYS FOR VARIOUS MODELS BRYSTON LIMITED WARRANTY Bryston analog audio products are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour. Bryston Digital products and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labour. Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manu- facture.