The remaining options depend on the Bearer setting. When the
bearer is set to GPRS:
♦
IP Address: enter the WAP gateway address required to connect to
the Internet.
♦
User Name: enter the User ID required to connect to the GPRS
network.
♦
Password: enter the password required to connect to the GPRS
network.
♦
APN: enter the access point name used for the address of the
GPRS network gateway.
When the bearer is set to Data:
♦
IP Address: enter the WAP gateway address required to connect to
the Internet.
♦
Login Name: enter the PPP server login ID.
♦
Password: enter the PPP server password.
♦
Dial-up Number: enter the PPP server phone number.
♦
Data Call Type: select a data call type; Analogue or ISDN.
Note: The Internet browser settings may vary, depending on the service provider. Contact
your service provider for further details.
Clear Cache
You can clear the information stored in the cache, the phone's
temporary memory which stores the most recently accessed Web
pages.
♦
Press the Yes soft key to confirm the deletion. Otherwise, press
the No soft key.
Fun & Tunes
112