Sony VPL-VW600ES Operating Instructions Manual page 39

Setting items
Network Setting
IP Address Setup
IP Address
Subnet Mask
Default Gateway
MAC Address
Description
When "Zone" is selected: Select the position to adjust with </,
buttons for the horizontal position (H position) and M/m buttons for
the vertical position (V position), then press
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Note
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
Perform internet protocol settings.
Select the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the DHCP
server such as a router.
Manual: Specify the IP address manually.
When "Manual" is selected for "IP Address Setup," select the item with
the </, buttons and input the value with the M/m buttons. When all
items are entered, select "Apply," and then press the
entered settings will be registered.
Set the unit's IP address.
Set the unit's subnet mask.
Set the unit's default gateway.
Display the unit's MAC address. This cannot be changed.
.
button. The
Installation Menu
39