Download Print this page

GE 106663 Owner's Manual

Cool mist humidifier.
Hide thumbs
   

Advertisement

INFO HOT-LINE: If, after reading this owner's
guide you have any questions or comments,
please call 1-877-207-0923 and a Customer Service
Representative will be happy to assist you.
106663
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS

Advertisement

   Related Manuals for GE 106663

No related manuals

   Summary of Contents for GE 106663

  • Page 1: Important Instructions

    INFO HOT-LINE: If, after reading this owner’s guide you have any questions or comments, please call 1-877-207-0923 and a Customer Service Representative will be happy to assist you. 106663 PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS...

  • Page 2

    The humidifier should be at least 4" away from the wall for best results. 5. NEVER place humidifier in an area where it is accessible to children. NEVER use humidifier in a closed room,...

  • Page 3: Operating Instructions

    F E AT U R E S - O P E R AT I O N How COOL Mist works Your GE Brand Cool Mist humidifier draws dry air through the rear air intake grill area. This air is then passed through a moisture–laden Wick Filter, which...

  • Page 4: Cleaning And Maintenance

    Remove Wick Filter and place in sink or tub as the Wick Filter will release water when not in the humidifi- 3. Carry the Humidifier Base and the Water Tank to the sink, then drain and rinse the Humidifier Base and Water Tank thoroughly to remove any sediment and dirt.

  • Page 5

    Short Wick Filter life Mineral deposits cause film on Water Tank to buildup. Wick Filter needs to be replaced. Using warm water to refill Water Tank. Humidifier is reacting to room humidity level. Over tightened. Solution Wait 15 minutes before starting humidifier.

  • Page 6: Service Instructions

    W A R R A N T Y I N F O R M AT I O N SERVICE INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty. 2.

This manual also for:

106763

Comments to this Manuals

Symbols: 0
Latest comments: