Configuring the System Logs
The Log Setting page allows you to enable or disable the system log function and
view the system logs.
Note: You can tick both boxes to view the system logs in the Events Log Table.
To configure the system log settings:
1.
Click Administration > System Log tab.
.
Check the Error and Notice boxes to view the system event logs.
.
Click Apply Changes. The log information (Error and Notice logs) will be
shown in the Events Log Table.
4.
Click Save Log to File to save a copy of logs information to your local drive.
5.
Click Clear Log Table to clear the system logs from the table.
44
DSL-N12E
Chapter 4: Configuring via the web GUI