Table of Contents
Advertisement
Configuring the IGMP Configuration settings
The IGMP (Internet Group Management Protocol) Proxy Configuration page allows
you to configure the amount of IPTV packets that can be received through a proxy.
To configure the IGMP settings:
1.
Click Internet Service > IGMP Proxy tab.
.
Tick Enable in IGMP Proxy and Multicast Allowed options.
.
In the Robust Count and Last Member Query Count fields, key in their
variables. The default values are and 1 respectively.
In the Query Interval field, key in the amount of time in seconds between
4.
IGMP general query messages sent by the router. The default value is 15
seconds.
5.
In the Query Response Interval field, key in the maximum time value that
the IGMP waits to receive a response to a general query message. The
default value is 10 seconds.
6.
In the Group Leave Delay field, key in the time value in milliseconds.
7.
Click Apply Changes to save the settings.
Chapter 4: Configuring via the web GUI
DSL-N12E
9
Hide quick links:
Advertisement
Table of Contents
