Millivolt Appliance Checkout; Electronic Appliance Checkout; Accessory Components - Lennox Hearth Products MPLDV-30NM Care And Operation Instructions Manual

WARNING: THIS APPLIANCE IS NOT
MEANT TO BURN WOOD. ANY ATTEMPT
TO DO SO COULD CAUSE IRREPARABLE
DAMAGE TO YOUR APPLIANCE AND
PROVE HAZARDOUS TO YOUR SAFETY.
WARNING: THE SIZE AND POSITION OF
THE LOG SET WAS ENGINEERED TO
GIVE YOUR APPLIANCE A SAFE, RELI-
ABLE AND ATTRACTIVE FLAME PAT-
TERN. ANY ATTEMPT TO USE A DIFFER-
ENT LOG SET IN THE FIREPLACE WILL
VOID THE WARRANTY AND WILL RE-
SULT IN INCOMPLETE COMBUSTION,
SOOTING, AND POOR FLAME QUALITY.
Volcanic Stones Placement
Refer to the detailed placement instructions
provided in the LOG PLACEMENT GUIDE ac-
companying this document.
Ceramic Panel Placement
Refer to the detailed ceramic panel placement
instructions provided in the LOG PLACEMENT
GUIDE accompanying this document.

Millivolt Appliance Checkout

The pilot flame should be steady, not lifting or
floating. Flame should be blue in color with
traces of orange at the outer edge.
The top 3/8" (10 mm) at the pilot generator
(thermopile) and the top 1/8" min (tip) of the
quick drop out thermocouple should be engulfed
in the pilot flame. The flame should project 1" (25
mm) beyond the hood at all three ports. See
Figure 9. To light the burner, refer to the lighting
instructions on pages 12 and 13.
MILLIVOLT
Hood
Thermocouple
Pilot
Nozzels
Thermopile
Figure 9
8

Electronic Appliance Checkout

To light the burner, refer to the lighting instruc-
tions on page 14 and 15 . Ensure the ignitor
lights the pilot. The pilot flame should engulf
the flame sensor as shown in Figure 10 .
With proper care and maintenance, your appli-
ance will provide many years of enjoyment. If you
should experience any problem, first refer to the
trouble shooting guide in this manual. If problem
persists, contact your Lennox distributor.
ELECTRONIC
Sensor
Igniter
Figure 10
Installing Optional Decorative Style View
Doors
Decorative Style View doors are optional with
these fireplaces. When installing Style View
doors on any of these models remove, retain
and store away the bottom panel from the
control compartment accessway. The bottom
of the Style View doors provide coverage for
this area. If the doors are installed, the unit
mounted On/Off switch, if used, must be relo-
cated to the bracket provided with the door.
Refer to the detailed instructions provided
with the doors.
Ignitor Rod
3/8" Min
(9 mm)
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

ACCESSORY COMPONENTS

Remote Control System (Standard)
Standard Remote Control System
Pilot
The Model RCL (Standard) Remote Control
Hood
System, features a simple On/Off control func-
tion for the fireplace. This model includes a
hand-held transmitter, a remote receiver with
wall-mount coverplate and all hardware re-
quired to install the unit. The remote receiver
can be wall or hearth mounted.
Remote Control System (Deluxe)
Deluxe Remote Control System
The Model RCL-T (Deluxe) Remote Control
System has all of the features of the standard
system along with an added easy to read LCD
screen which presents access to many en-
hancements, including; battery power level in-
dicator, timer, mode of operation, thermostatic
display including room temperature in either
metric of English units, flame indicator and
clock. Fully programmable, the Model RCL-T
allows for command over nearly all operational
and temperature variables, using the hand held
remote control transmitter.
H0249 RCL
H0251 RCL-T