Using Optical Disc Drives - Toshiba Portege M780 User Manual

Using optical disc drives

The full-size drive provides high-performance execution of CD/DVD-ROM-
based programs. You can run either 12 cm (4.72") or 8 cm (3.15")
CD/DVDs without an adaptor. A Serial ATA interface controller is used for
CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows.
Use the DVD playback application to view DVD-Video discs.
If you have an Ultra Slim Bay DVD Super Multi (Double Layer) Drive Kit II,
refer also to the
(Double Layer) Drive Kit II
When the power of the optical disc drive is off, pressing the FN + Tab keys
will turn the power of the optical disc drive on. Furthermore, it is possible to
set it to turn the power of the optical disc drive on and eject the tray at the
same time.
Loading discs
To load CD/DVDs, follow the steps as detailed below:
1. When the computer's power is on, press the eject button to open the
disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
1. Eject button
User's Manual
Writing CD/DVDs on Ultra Slim Bay DVD Super Multi
Figure 4-23 Pressing the eject button and pulling the disc tray open
section for precautions on writing to CDs/DVDs.
2. Disc tray
Operating Basics
1
2
4-33