Asus P4C800-E User Manual page 39

4. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2)
(on RAID models only)
These Serial ATA connectors support SATA hard disks that you may
configure as a RAID set. Through the onboard Promise
RAID controller, you may create a RAID0, RAID1, RAID0+1, or multi-
RAID configuration together with the RAID ATA133 connector. See
Chapter 5 for details on RAID configuration.
®
P4C800-E
P4C800-E SATA RAID Connectors
1. If you wish to create a RAID set, make sure that you have
connected the SATA cable and installed Serial ATA devices. You
cannot enter the SATARaid™ utility and SATA BIOS setup during
POST if there are no connected Serial ATA devices.
2. The Promise PDC20376 RAID controller does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.
ASUS P4C800-E Deluxe motherboard user guide
SATA_RAID2
SATA_RAID1
®
PDC20378
2-25