Tidying Cables - LG LN54 series Owner's Manual

14
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power first, and then move
y y
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
y y
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y y
cause damage to the TV and void your
warranty.
Use the screws and wall mount bracket that
y y
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
y y
standard screw specifications.
The wall mount kit includes an installation
y y
manual and necessary parts.
The wall mount bracket is not provided. You
y y
can obtain additional accessories from your
local dealer.
The length of screws may differ depending
y y
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
y y
supplied with the wall mount.
Tidying cables
1
Secure the power cord with the protective
bracket/bolt.
Protective bracket/bolt
2
Gather and bind the cables with the cable
holder.
Cable holder
CAUTION
Do not move the TV by holding the Cable
y y
Holder and Power Cord Holder, as the
Cable holders may break, and injuries and
damage to the TV may occur.