Table of Contents
Advertisement
Maintenance
E
N
Replacing Disposable Dust Bag
WARNING:
Unplug Power Cord from electrical socket before servicing.
BAG REMOVAL:
Unzip Outer Bag completely.
6
Pull bag cardboard collar to release bag dock door from Connector Assembly. Bag dock door will
7
hinge downward.
Gently pull bag cardboard collar upward out of the bag dock. Saniseal
8
close automatically.
BAG INSTALLATION:
Slide the cardboard collar completely onto bag dock door.
9
Firmly push bag dock door with both thumbs on indication point until it snaps.
10
6
Replacing Worn Belt
WARNING:
Unplug Power Cord from electrical socket before servicing.
11
Remove the replacement belt from the storage channel on the vacuum base.
Remove the Belt Door by removing the Phillips screw located on side of Power Head.
12
Fold door away from the Power Head and lift it away.
13
Remove the belt from the motor drive shaft and brushroll pulley .
14
Loop the new belt over the brushroll pulley. Stretch the opposite end of the belt on to the motor
15
drive shaft.
Replace the Belt Door by placing the bottom tab on door into slots located inside Power Head and
13
pressing the door closed.
Replace the Phillips screw and tighten.
12
11
G
L
I
S
H
7
8
12
13
6
dust seal will
®
PRESS
UNTIL SNAP
IS HEARD
8
10
14
15
Advertisement
Table of Contents
