Packing List; Component Identification - FireLake 155 Owner's Manual

PACKING LIST

Components of a Model 155, 200, 245, 315 Heater:
Crated Heat Exchanger with Cabinet (remove clean out tool and parts from inside the chamber)
Burner (factory test fired burner in shaped foam packaging, save box should shipping be needed)
Blower Assembly (Save box.)
Accessory Carton (Cleanable Oil Filter, 1/2" Cutoff valve, 3/4" Suction Screen, 3/4" Check Valve,
Wall Thermostat, 1/2" x 1/4" Swivel, 3/4" x 1/2" Swivel, 1/4" x 1/4" x 1/8" Tee, 1/4" x 1½" Hex
Nipple, 1/2" x 2 Hex Nipple, 1/4" x 2" Nipple, Warranty Card & Manual , (2) Pressure Gauge)
Barometric Damper (for chimney)
Oil Transfer Pump

COMPONENT IDENTIFICATION

Crated or Boxed Exchanger Burner (appearance varies by model)
Cleanout Tool w/Hoe & Blower Assembly Oil Pump
Barometric Damper
Accessory Carton
Page 5 of 5