Related Manuals for Steel City 65115
Summary of Contents for Steel City 65115
-
Page 1: Model Number
User Manual Read and understand this manual before using machine. MINI DUST COLLECTOR Model Number 65115 ® STEEL CITY TOOL WORKS Manual Part No. OR74016 VER. 5.07... -
Page 3: Table Of Contents
The drawings, illustrations, photographs, and specifications in this user manual represent your machine at time of print. However, changes may be made to your machine or this manual at any time with no obligation to Steel City Tool Works. -
Page 4: Warranty
2 YEAR LIMITED WARRANTY Steel City Tool Works, LLC (SCTW) warrants this SCTW machinery to be free of defects in workmanship and materials for a period of 2 years from the date of the original retail purchase by the original owner for domestic use. Granite components are warranted for 2 years based on normal use and is void if non SCTW accessories are used that cause the break or chip. -
Page 5: Warranty Card
City:______________________________________________ ___ Vacuum Veneer Press ___ Wide Belt Sander Other____________________________________________ How did you first learn of Steel City Tool Works? ___ Advertisement ___ Mail Order Catalog 11. Which benchtop tools do you own? Check all that apply. ___ Web Site... - Page 6 FOLD ON DOTTED LINE PLACE STAMP SteelCityToolWorks #4 Northpoint Court Bolingbrook, IL 60440 FOLD ON DOTTED LINE...
-
Page 7: Product Specifications
PRODUCT SPECIFICATIONS MOTOR SPECIFICATIONS: PRODUCT SPECIFICATIONS Type Universal Noise Level (Decibel) 95 db Amps Number of Ports Voltage Port Diameter 4 inch Phase Single Dust Collection Bag Micron Hertz Dust Collection Bag Capacity 3 Cu. Ft. 10,500 DEFINITION OF TERMS Below are some terms that will help you to understand and setup your Dust Collector and design your own Dust Collection System. -
Page 8: Feature Identification
FEATURE IDENTIFICATION A) Mini Dust Collector B) Hose Clamp 4.5" (2) C) Rubber Coupling D) On/Off Switch E) Hose Clamp 4" F) Dust Collection Bag... -
Page 9: General Safety
GENERAL SAFETY WARNING WARNING TO AVOID serious injury and damage to the machine, read and follow all Safety and Operating Instructions before assembling and operating this machine. This manual is not totally comprehensive. It does not Exposure to the dust created by power sanding, saw- and can not convey every possible safety and opera- ing, grinding, drilling and other construction activities tional problem which may arise while using this... - Page 10 10. DO NOT use electrical tools in the presence of WARNING flammable liquids or gasses. 11. DO NOT FORCE the machine to perform an opera- tion for which it was not designed. It will do a safer and higher quality job by only performing operations 3.
-
Page 11: Product Safety
24. STAY ALERT, watch what you are doing, and use 28. SAVE these instructions and refer to them frequent- common sense when operating any machine. DO ly and use them to instruct other users. NOT operate any machine tool while tired or under 29. -
Page 12: Electrical Requirements
13. USE only as described in this manual. USE acces- sories only recommended by Steel City. 18. DO NOT insert fingers or foreign objects into the dust intake port. Keep hair, loose clothing, 14. -
Page 13: Grounding Instructions
GROUNDING INSTRUCTIONS The motor supplied with your machine is a 120 volt, WARNING alternating current, 60 hertz, single phase motor. It is shipped wired for 120 volt application. Never connect the green or ground wire to a live terminal. This tool is intended for use on a circuit that has an This machine MUST BE GROUNDED while in use to electrical receptacle as shown in Figure 1-1. -
Page 14: Extension Cords
EXTENSION CORDS CAUTION USE ONLY a 3-wire extension cord that has a 3-prong WARNING grounding plug and a 3-pole receptacle that accepts the machine’s plug. If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indi- To reduce the risk of fire or electrical shock, use the cate that it is acceptable for outdoor use. -
Page 15: Unpacking And Inventory
“ON” the machine. The machine should only be turned “ON” after all the parts have been obtained and installed correctly. For missing parts, contact Steel City at 1-877-SC4-TOOL. A) Mini Dust Collector B) Hose clamps 4.5" (2) C) Rubber Coupling D) Hose Clamp 4"... -
Page 16: Assembly
ASSEMBLY and OPERATIONS 1. Attach the dust collection bag (A) over the exhaust WARNING port (C) of the dust collector and secure with the 1. DO NOT assemble the Dust Collector until you are 4" hose clamp (B). SEE FIG. 1. sure the tool IS NOT plugged in. -
Page 17: Maintenance
WARNING Repairs to the Dust Collector should be performed by trained personnel only. Contact your nearest Steel City Dealer for authorized service. Unauthorized repairs or replacement with non-factory parts could cause serious injury to the operator and damage to the Dust Collector. -
Page 18: Parts List
PARTS PARTS PART PART DESCRIPTION QTY. DESCRIPTION QTY. OR73989 HOSE CLAMP 4-1/2” OR74009 DUST COLLECTION BAG OR73990 RUBBER COUPLER OR95031 SCR SELF TAPPING M4.2 X 14mm OR74010 ADAPTOR TUBE OR95051 SCR SELF TAPPING M4.2 X 25mm OR95050 SCR SELF TAPPING M4.2 X 12mm OR74005 BEARING RETAINER OR95050...
Need help?
Do you have a question about the 65115 and is the answer not in the manual?
Questions and answers