Related Manuals for Steel City 65110
Summary of Contents for Steel City 65110
-
Page 1: Model Number
User Manual Read and understand this manual before using machine. 1 HP DUST COLLECTOR Model Number 65110 ® STEEL CITY TOOL WORKS Manual Part No. OR70081... -
Page 3: Table Of Contents
The drawings, illustrations, photographs, and specifications in this user manual represent your machine at time of print. However, changes may be made to your machine or this manual at any time with no obligation to Steel City Tool Works. -
Page 4: Warranty
2 YEAR LIMITED WARRANTY Steel City Tool Works, LLC (SCTW) warrants this SCTW machinery to be free of defects in workmanship and materials for a period of 2 years from the date of the original retail purchase by the original owner for domestic use. Granite components are warranted for 2 years based on normal use and is void if non SCTW accessories are used that cause the break or chip. -
Page 5: Warranty Card
City:______________________________________________ ___ Vacuum Veneer Press ___ Wide Belt Sander Other____________________________________________ How did you first learn of Steel City Tool Works? ___ Advertisement ___ Mail Order Catalog 11. Which benchtop tools do you own? Check all that apply. ___ Web Site... - Page 6 FOLD ON DOTTED LINE PLACE STAMP SteelCityToolWorks #4 Northpoint Court Bolingbrook, IL 60440 FOLD ON DOTTED LINE...
-
Page 7: Product Specifications
Plastic ACCESSORIES AND ATTACHMENTS WARNING • Use only accessories recommended for this machine. Contact your local Steel City dealer for accessories, or Using other accessories may cause serious injury and visit our website at: www.steelcitytoolworks.com. cause damage to the machine. -
Page 8: Feature Identification
FEATURE IDENTIFICATION Fig. 1-1 A. 4-inch Intake Port B. 4-inch Flexible Hose C. Filter Bag Hanger D. Filter Bag E. Collection Bag, Plastic Locking Band G. Blower and Motor Assembly H. Side Support Base J. Caster... -
Page 9: General Safety
GENERAL SAFETY WARNING WARNING TO AVOID serious injury and damage to the machine, read and follow all Safety and Operating Instructions before assembling and operating this machine. This manual is not totally comprehensive. It does not Exposure to the dust created by power sanding, saw- and can not convey every possible safety and opera- ing, grinding, drilling and other construction activities tional problem which may arise while using this... - Page 10 10. DO NOT use electrical tools in the presence of WARNING flammable liquids or gasses. 11. DO NOT FORCE the machine to perform an opera- tion for which it was not designed. It will do a safer and higher quality job by only performing operations 3.
-
Page 11: Product Safety
24. STAY ALERT, watch what you are doing, and use 3. Prevent electrical shock. Follow all electrical and common sense when operating any machine. DO safety codes, including the National Electrical Code NOT operate any machine tool while tired or under (NEC) and the Occupational Safety and Health the influence of drugs, alcohol, or medication. -
Page 12: Electrical Requirements
13. USE only as described in this manual. USE acces- 19. DO NOT use the dust collector without the dust sories only recommended by Steel City. collection bag in place and properly secured. 14. DO NOT pull the dust collector by the power cord. -
Page 13: Grounding Instructions
GROUNDING INSTRUCTIONS The motor supplied with your machine is a 120 volt, WARNING alternating current, 60 hertz, single phase motor. It is shipped wired for 120 volt application. Never connect the green or ground wire to a live terminal. This tool is intended for use on a circuit that has an This machine MUST BE GROUNDED while in use to electrical receptacle as shown in Figure 1-1. -
Page 14: Extension Cords
EXTENSION CORDS CAUTION USE ONLY a 3-wire extension cord that has a 3-prong WARNING grounding plug and a 3-pole receptacle that accepts the machine’s plug. If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indi- To reduce the risk of fire or electrical shock, use the cate that it is acceptable for outdoor use. -
Page 15: Unpacking & Inventory
“ON” after all the parts have been obtained and installed correctly. For missing parts, Remove any protective materials and coatings from all contact Steel City at 1-877-SC4-TOOL. of the parts and the dust collector. The protective coat- Fig. 1-1 A. - Page 16 Fig. 1-2 A. Hex nut 3/8-16 (4) B. Lock washer 3/8” (4) C. Lock washer 5/16” (12) D. Hex nut 5/16-18 (9) E. Hex head screw 5/16-18 x 5/8” (12)
-
Page 17: Assembly
ASSEMBLY Fig. 2-1 WARNING 1. DO NOT assemble the Dust Collector until you are sure the tool IS NOT plugged in. 2. DO NOT assemble the Dust Collector until you are sure the power switch is in the “OFF” position. 3. - Page 18 MOTOR AND BLOWER SUPPORT ASSEMBLY TO BASE ASSEMBLY WARNING WARNING MAKE CERTAIN THE DUST COLLECTOR IS MAKE CERTAIN THE DUST COLLECTOR IS DISCONNECTED FROM THE POWER SOURCE. DISCONNECTED FROM THE POWER SOURCE. 1. Place motor and blower assembly and base on Fig.
- Page 19 FILTER AND COLLECTION BAG 3. Insert locking band (D) through all the loops of filter bag (E). Position the open end of the filter bag over TO DRUM ASSEMBLY the top lip of the drum. Make certain the locking band is positioned in the upper recessed channel WARNING of the drum and fasten clamp (F) securely to drum.
-
Page 20: Operations
OPERATIONS According to many OSHA, ANSI, STATE, and LOCAL HELPFUL HINTS: CODES, it is the Employers Responsibility to: • Always run the largest appropriate diameter hose • PERMIT ONLY trained and authorized employees to as far as possible. Running a smaller diameter hose operate equipment. -
Page 21: Maintenance
WARNING WARNING Repairs to the Dust Collector should be performed by trained personnel only. Contact your nearest Steel City Dealer for authorized service. Unauthorized repairs or With the machine unplugged, blow off motor with low replacement with non-factory parts could cause serious pressure air to remove dust or dirt. -
Page 22: Troubleshooting
TROUBLESHOOTING GUIDE TO PREVENT INJURY TO YOURSELF or damage to the machine, turn the switch to the “OFF” position and unplug the power cord from the electrical receptacle before making any adjustments. PROBLEM LIKELY CAUSE(S) SOLUTION Motor does 1. Switch is not in the “ON” position 1. - Page 24 PARTS...
-
Page 25: Parts List
SWIVEL CASTER OR70086 LOWER HANGER OR90650 INTAKE PORT CAP OR90616 HEX NUT 5/16-18 OR65935 4” HOSE CLAMP OR70087 FILTER BAG, 1 MICRON with Steel City Logo OR90662 LOCKING BAND LABELS OR90662 LOCKING BAND OR70088 COLLECTION BAG, PLASTIC PART CUSTOMER DESCRIPTION QTY. - Page 26 x NOTES x...
Need help?
Do you have a question about the 65110 and is the answer not in the manual?
Questions and answers