The Functions Of The Control Panel - Daewoo DWF-S99NS Instruction Manual

THE FUNCTIONS OF THE CONTROL PANEL

POWER • Press this switch to turn the power on or off.
• It can be used to adjust amount of water according to the size of the
load to be washed.
WATER
• As the button is pressed, water level is selected by
LEVEL
MEDIUM
• It can be used to pre-engage time for wash.
RES
• It is the button for the partial process or the combination of each
PROCESS
process (wash, rinse, spin) (See page 10)
• If you want to change wash time, rinse times, spin time, you must
CONTROL
press this button after selecting each process by the process button.
ONLY SPIN
Also, this button can be used to spin only. (See page 10)
• It can be used to select the full-automatic course.
• As the button is pressed, course will be selected by following order:
COURSE
FUZZY
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
START/
HOLD press the "START/HOLD" button
change
HIGH SMALL LOW
BLANKET ECONOMY
press the "START/HOLD" button again.
8
WOOL SOAK
Select the course that you want to