How To Clean The Filter - Daewoo DWF-750MS Instruction Manual

DWF-750M/MS 01.3.26 9:54 PM ˘ ` 13

HOW TO CLEAN THE FILTER

Cleaning the Lint Filter
1 Pull the filter frame upward. 2 Turn the lint filter inside
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
1 Pull the power
plug out before
cleaning it.
Cleaning the drain filter
• In case of "Pump-Model" drain hose, this filter's equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ..
• If the drain filter is not cleaned at proper time (every 10 times of use), drain problem could
be caused.
1 Put down the remained
water in the hose. And
put a container under the
filter to collect water .
CONTAINER
FILTER
4 Clean the drain filter.
CAP
out, wash the lint off
with water.
Lint Filter
2 Turn off the water
supply to the
washer and
Separate the inlet
hose.
2 Turn the cap counterclockwise.
5 Put in the filter along the
guiding prominence of
the case. Please note the
left position of the filter
adjusting the groove to
the guide rib.
FILTER
CAP
13
3 Return the filter as it was,
and insert the filter frame
into the slot.
Filter Frame
3 Pull the inlet filter
out.
3 Pull out the filter
assembly.
CAP
CAP
6 Turn the cap clockwise
tightly.
CASE
GUIDE
RIB
SUIT
4 Remove the dirt
from the inlet
filter with a brush.
FILTER
CASE
CAP