Siemens IQ 100 Operating And Installation Instruction page 42

Transport,
e.g. when moving
Preparing and inserting the
transport bolts
42
Before transporting the washing machine:
- Turn off the tap.
- Reduce the water pressure in the water inlet hose
(refer to page 27).
- Drain any residual washing solution (refer to
page 26).
- Disconnect the washing machine from the mains.
- Dismantle the supply and drainage hose.
- Install transportation protection devices.
Having transported the appliance and ensured
proper installation and connection, allow the Single
Spin programme to run through before starting the
first wash programme.
Transporting the washing machine:
q Remove the 4 covers C.
q Remove the rear cover D and prepare the
transport bolts.
q Insert and tighten the transport bolts.