Siemens WM08E260BC Instructions For Installation And Use Manual page 15

Table of Contents

Advertisement

End of wash programme/Removing the laundry
Spin
B
-Endm
The «
ö
screen shows 
 and an audible signal is giv
en out (if activated).
m Turn the programme selector to «
without final spin)
If ò" (
screen shows ò". The programme may then
be continued or the water may be emptied:
- To continue with the running programme:
m Select a washing speed by pressing the
Spin
B button (except ò").
"
Start
M» button.
m Press the «
m After the programme has finished, turn the
programme selector to «
- To empty the water:
m Select and extra programme («
4
Spin
«
» ).
Start
M» button.
m Press the «
m After the selected extra programme has fin
ished, turn the programme selector to «
» indicator flashes, the
Off
».
» were selected, the
Off
».
b
Empty
Off
Taking the laundry out of the machine
m Turn off the tap.
m Open the door.
!
The door of the washing machine should not
be opened during the washing cycle. To
open the door, wait until the «
indicator flashes, the screen shows 
and the audible signal is given out (if acti
vated) or turn the programme selector to
Off
«
» and wait at least 2 minutes.
m Take the laundry out of the machine.
!
Remove foreign bodies and metallic objects
(clips,
coins etc.) which might have
accumulated inside the drum or on the
rubber seal. Risk of rusting!
» or
Leave the door open so that air can circulate in
side and dry the appliance.
».
Spin
B
-Endm
»
ö
"
15
en

Advertisement

Table of Contents
loading

Table of Contents