Table of Contents
Advertisement
Fascia
Fig. 2
1
On/Off button
Switches the whole appliance on and
off.
2
Temperature selection button
The button sets the temperature in
the refrigerator compartment.
3
Temperature display
The numbers correspond to the set
refrigerator compartment temperatures
in °C.
4
Super button
Switches super cooling on and off.
Note ambient
temperature and
ventilation
The climatic class can be found on the
rating plate. It specifies the ambient
temperatures at which the appliance may
be operated. The rating plate is located at
the bottom left-hand side inside the
fridge.
Climatic category
SN
N
ST
T
Permitted ambient
temperature
+10 °C to 32 °C
+16 °C to 32 °C
+16 °C to 38 °C
+16 °C to 43 °C
Ventilation
Fig. 3
The air at the back of the appliance will
heat up. This warm air must be allowed to
freely escape, otherwise the refrigerating
machine must perform more. This raises
electricity consumption. Hence, the
air inlet and outlet apertures should never
be covered or blocked off!
Switching on
the appliance
Switch on the appliance with the On/Off
button. Fig. 2/1
The temperature display flashes, Fig. 2/3,
until the appliance has reached the set
temperature.
The appliance starts cooling, the interior
light is switched on when the door is
open.
When the appliance has been switched
on, it may take several hours until the set
temperature is reached. Do not put any
food in the appliance beforehand.
en
7
Advertisement
Table of Contents
