Table of Contents
Advertisement
Having
Trouble?
4-6 U
CD C
SING A
HANGER
Troubleshooting your CD Changer
This section contains some tips for troubleshooting
problems with your CD Changer hookup.
My CD Changer does not appear in the Music Center
Make sure:
1. You have a supported CD Changer. See "Accessories" on
page 2-6.
2. You have attached all the cables. You need more than just
audio cables. The S-Link / Control cable is required for the
Music Center to control the Changer.
3. You have identified the Changer in A/V Connections.
4. You have set the ID on the back of the Changer to ID1.
5. You have turned the Changer off and reset power to the
Music Center.
I can see my CDs, but I can't hear them
Make sure:
1. Your speakers are on. Try playing an MP3 file or a CD from
the front tray.
2. You have connected an audio cable between the Changer
and the Music Center. The Music Center uses an S-Link or
Control cable to control the Changer, but you still need an
audio cable for the music.
3. You have connected the audio cable from an audio
output connection on the Changer, and to an audio input
connection on the Music Center.
4. You have specified the right setup connection in A/V
Connections. If you have hooked up the Changer to one of
your Music Center digital inputs, make sure you have set
it up on a digital input and not the analog rec in.
PAQ M
C
—A
I
USIC
ENTER
DDENDUM
A
Advertisement
Table of Contents
