Table of Contents
Advertisement
Connecting
Cables
Did you know ...
You can use a regular mini
stereo or mono cable as an
S-Link / Control A1 cable.
They are functionally
equivalent.
A/V
Connections
4-2 U
CD C
SING A
HANGER
Connecting the Music Center to the Changer
To connect the Music Center to your CD Changer, follow
these steps:
1. Choose which audio input you will use. In most cases, the
changer came with an analog stereo cable. Hook the
cable from the Changer audio out to the Music Center
audio input (callout 3 in the previous picture). If you have
a digital cable, use it instead.
2. Attach an S-Link or Control A1 cable between the
Changer and the Music Center.
3. If there is an ID switch on the CD Changer, make certain
it is set to ID 1.
Once your CD Changer is physically connected, you must
configure the Music Center A/V Connections in Setup.
Setting up your A/V Connections
Before you can use your CD Changer with the Music Center,
you must tell the Music Center you have attached one. You
do this with the A/V connections screen.
To set up your CD Changer connection:
1. Press the Setup
button on the
remote control. The
System Setup screen
is displayed.
2. Use the navigation
arrows to highlight
A/V connections, and
press the Select
button.
3. From the Setup - A/V Connections screen, highlight audio
& video connections and press Select.
PAQ M
C
—A
I
USIC
ENTER
DDENDUM
A
Advertisement
Table of Contents
