Checking Settings - Compaq iPAQ Music Center MC-1 Manual

Checking
Settings
3-8 H N
OME ETWORKING
8. For Primary TCP/IP Settings, highlight dynamic (or static if
you're sure your network uses static addressing) and
press Select. Then highlight save and press Select.
9. If you selected static addressing, fill out the static IP
addressing fields. The IP address, subnet mask, gateway
address, and DNS 1 entries are required.
10. From the Setup - Internet Configuration screen highlight
secondary tcp/ip settings and press Select.
11. For Secondary TCP/IP Settings, highlight dynamic or static
and press Select. Then highlight save and press Select.
12. Press Setup to exit the setup screens.
Your iPAQ Music Center is now configured to access the
Internet using your ethernet network.
Verifying your Network Settings
You can verify your network settings by viewing the system
information screen. This is especially useful when
troubleshooting network problems. If you are using dynamic
addressing, your assigned IP address will be shown on this
screen.
To view your system information:
1. Press the Setup button on the remote control. The
System Setup screen is displayed.
2. Use the navigation arrows to highlight utilities, and press
Select.
3. Highlight system information and press Select.
Your network settings are displayed at the bottom of the
page. If your IP address for your network type (Ethernet or
HomePNA) is 0.0.0.0, then see "Having Trouble?" on
page 3-9.
PAQ M C —A
I USIC ENTER DDENDUM
A