Table of Contents
Advertisement
Ethernet
(continued)
Tip
Once the iPAQ Music Center is
connected to the home
network, it will no longer
connect to the Internet using
its dial-up modem. Make sure
that there is a PC or other
device on your home network
which is acting as a
communications gateway to
the internet.
Tip
In most cases, the Primary
and Secondary network
connection method is the
same (both set to homePNA
or both set to ethernet).
However, in custom
situations, you could access
both homePNA and ethernet
networks.
PAQ M
C
—A
I
USIC
ENTER
DDENDUM
Setting up the Music Center for Ethernet
1. Press the Setup
button on the
remote control. The
System Setup screen
is displayed.
2. Use the navigation arrows to highlight internet
configuration, and press the Select button.
3. From the Setup - Internet Configuration screen select
network connections, and press the Select button.
4. Under Primary
Network Connection,
use the navigation
arrows to highlight
ethernet, and press
the Select button.
This is the
connection used by
the Music Center for
internet access (CD
lookup, E-Commerce, etc).
5. Under Secondary Network Connection, use the navigation
arrows to highlight ethernet, and press the Select button.
The Music Center will use this connection for LAN access
(connecting to the Media Manager program using a PC
on the network).
6. Highlight save and press Select.
7. From the Setup - Internet Configuration screen highlight
primary tcp/ip settings and press Select.
A
H
N
3-7
OME
ETWORKING
Advertisement
Table of Contents
