Loading Paper In Tray 1 - Hitachi Koki DDS 50 Quick Reference Manual

Loading Paper in Tray 1

Tray 1 holds 500 sheets of either Letter, Legal, Ledger, A5, B5, A4,
B4, or A3. The paper size is set at the factory and can be adjusted by
a Service Representative to support other paper sizes.
To load paper in tray 1:
NOTE:
If the printer is in energy save mode, the tray will
not open to allow paper loading. Press any
button on the Operator Control Panel to "wake"
the printer before attempting to open the tray.
1. Press the paper descent key (US Models) or pull the handle
(European Models) and then slide out the tray.
2. Load the paper stack into the tray so that the front side (the side
to be printed on) faces down.
3-2 Paper Handling