Related Manuals for Worcester DANESMOOR UTILITY 12-14
Summary of Contents for Worcester DANESMOOR UTILITY 12-14
-
Page 1: User Instructions
DANESMOOR UTILITY 12-14, 15-19, 20-25, 26-32, 32-50, 50-70 FLOOR-STANDING OIL-FIRED PRESSURE-JET BOILERS USER INSTRUCTIONS & CUSTOMER CARE GUIDE... -
Page 2: Excellence Comes As Standard
Danesmoor oil boilers are made by Worcester and the strictest quality control standards ever demanded are applied throughout every stage of production. Indeed, Worcester, part of the Bosch Group have led the field in innovative boiler design and performance for more than 40 years. -
Page 3: General Information
GENERAL INFORMATION To ensure you get the very best from your new Worcester Danesmoor oil boiler, please read these notes and instructions carefully. ELECTRICAL CONNECTION A mains cable should be connected to a double pole isolator with a contact separation of 3 mm on all poles and supplying the appliance and controls only. -
Page 4: Technical Information
TECHNICAL INFORMATION The Danesmoor range of oil-fired boilers can provide both domestic hot water and full central heating, with outputs ranging from 12kW to 70kW (40,000 to 239,000 Btu/h). Domestic hot water must be supplied via a conventional indirect hot-water sys- tem, utilising an indirect double-feed cylinder. - Page 5 The sequence will continue until the boiler is programmed – either manually or by an automatic programmer – for a period of shutdown. Fig. 1. Control Facia Isolate mains Bosch Thermotechnik TEMP supply before removing Burner...
-
Page 6: Temperature Control
TEMPERATURE CONTROL The temperature control knob gives you con- Fig. 2. TEMP trol over the water temperature in your central heating radiators, and you can adjust it to any position within the indicated range (as shown in Fig. 2). Higher settings obviously mean hotter radia- tors and rooms will reach the required tempera- ture quicker. - Page 7 Provided the system is still calling for heat, the burner will then operate and commence another start cycle. Persistent lockout indicates a fault and an engineer should be called, so do not attempt to repeatedly restart the boiler. FUEL Your Worcester Danesmoor pressure-jet boiler is set to burn 28-second kerosene fuel.
-
Page 8: Fault Finder
A call-out charge will be made where: The appliance has been installed for over 24 months The appliance has been installed for more than 1 year but less than 2 years and has not had a first annual service by an approved company. - Page 9 MAINTAINING YOUR BOILER’S EFFICIENCY & PERFORMANCE Your new Worcester Danesmoor oil-fired boiler represents a long-term investment in a reliable, high quality product. In order to realise its maximum working life, and to ensure it continues to operate at peak efficiency and performance, it is essential that your boiler receives regular, competent servicing and annual maintenance checks beyond the initial 24 month guarantee period.
- Page 10 9.00am to 12.00pm Please contact our UK Contact Centre number where our friendly oper- ators will book your call with one of our team of nationwide engi- neers. NOTE: Please refer to our website for our bank holiday hours. www.worcester-bosch.co.uk...
- Page 11 3. That the householder may be asked mainland Great Britain. to prove the date of installation and This guarantee is given in addition to all your normal statutory rights. Worcester, Bosch Group is a trading name of BBT Thermotechnology UK Ltd.
-
Page 12: Guarantee Registration
FOR YOUR OWN RECORD MODEL SERIAL NUMBER (See identity label inside appliance casing) TYPE/SIZE DATE OF INSTALLATION www.worcester-bosch.co.uk Worcester, Bosch Group. Cotswold Way, Warndon, Worcester WR4 9SW. Telephone: (01905) 754624. Fax: (01905) 753130. Technical Service Helpline 08705 266241. 8 716 114 748a (11/07)