Internal Display Panel - Toshiba T210 User Manual

T210/T230

Internal display panel

Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to Chapter 7,
for further information.
Problem
No display
Markings appear on
the computer's display
panel.
Problems above
remain unresolved or
other problems occur
The display quality is
poor.
8-8
Procedure
Press the FN + F5 hot keys to adjust the display
priority, and to make sure it is not set for output to
an external monitor.
These marks may have come from contact with
the keyboard and Touch Pad while the display
panel has been closed. You should try to remove
the marks by gently wiping the display panel with
a clean dry cloth or, if this fails, with a good
quality LCD screen cleaner. In this latter instance
you should always follow the instructions with the
screen cleaner and always ensure you let the
display panel dry properly before closing it.
You should initially refer to the documentation
supplied with you software to determine if it is
this that is causing the problems. Alternatively
you may wish to run the TOSHIBA PC
Diagnostic Tool to check the general operation
of the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Change the refresh rate if you computer includes
the LCD Refresh Rate function.
1. Click Start -> Control Panel. Select Large
icons or Small icons in View by, and then
click Intel(R) Graphics and Media.
2. Click Display and then click General
Settings.
3. Choose 60Hz for Refresh Rate and then
click OK.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
HW Setup,
User's Manual