Bang & Olufsen BeoSystem 3 Manual page 41

Home cinema setup
Use a plasma screen and/or a projector or connect
a home automation system to the TV, so you can
control room lights and curtains.
If you only connect a screen or a projector,
connect it to the DISPLAY 1 socket, otherwise
connect the screen to the DISPLAY 1 socket and
the projector to the DISPLAY 2 socket. You cannot
connect two screens or two projectors at the
same time.
Mains cord and plug
Expand your setup, for example in a home cinema system with a projector and a
home automation system.
The supplied mains cord and plug are specially designed for the TV. If you change the plug or in any way
damage the mains cord, it can affect the TV performance. Connect the ~ socket on the connection
panel of your TV to the wall outlet. The IR-receiver lights up in red and the TV is in standby mode and
ready to be used.
CINEMA
BEOSYSTEM 3
39
Home
Automation
system