Bang & Olufsen BeoSystem 3 Manual page 39

Register additional equipment
Register the equipment you have connected to
the TV, if it is not detected automatically by the
TV. Repeat the procedure for each socket group.
'STANDBY OPTIONS'
Bring up 'TV
SETUP' menu
Contents of the
'CONNECTIONS'
menu
Source options in
the 'AV1–AV6'
menus
'(VGA)' Equipment connected via VGA socket (AV5 or AV6).
'(Y – Pb – Pr)' Equipment connected via Y – Pb – Pr socket (AV2 or AV3).
Set the set-top box to switch off when you switch source or when you switch off the TV. You can also
choose that the set-top box should always be switched on or that it should be switched on and off
manually by means of the remote control.
Select
Select sockets
'CONNECTIONS'
in a socket
in 'OPTIONS'
group and
menu
register
AV1–AV6
Register connected equipment
DISPLAY 1–2
Register a connected screen and/or projector
HDMI EXPANDER
Enable or disable an HDMI Expander connected to
the HDMI C socket
LINK
Set a link frequency and enable the system
modulator
NONE Nothing connected
V.MEM Connected video recorder
DVD/DVD2 Connected DVD player or recorder
DTV2 (V.AUX) Equipment, such as a set-top box
DTV Equipment, such as a set-top box
V.AUX2 Equipment, such as a video game console
TV Connected TV tuner
PC Connected PC
CENTRE For connection of a source centre, which may
contain up to six built-in sources (only in either the
'AV1' or 'AV2' menu)
The above are only examples of registrations, you can
register available equipment to any source option.
You may also have to register additional equipment in
the Master Link system.
Select 'STANDBY Follow on-screen
OPTIONS' menu instructions
37