Turn Subsonic Filter On/Off; Adjust Volume; Replace Fuse - Philips car power amplifier User Manual

Turn subsonic filter on/off
1
Slide SUBSONIC ON/OFF to ON
positon.
The subsonic filter is turned on.
»
Frequency below 15Hz is filtered.
» To turn off the subsonic filter, slide
SUBSONIC ON/OFF to OFF position.
SUBSONIC
ON OFF

Adjust volume

You can adjust volume at the front seat via the
supplied volume control.
1
Connect the supplied volume controller
to the REMOTE LEVEL CONTROL
socket.
2
Rotate the volume knob to adjust
volume.
REMOTE
LEVEL CONTROL
SUB
WOOFER
SUBSONIC
ON OFF
30Hz 320Hz
REMOTE
LEVEL CONTROL
EN
10

Replace fuse

If there is no power, the fuse may be damaged
and need to be replaced.
1
Pull out the damaged fuse.
2
Replace the fuse with the supplied fuses
or to buy two fuses that matches the
voltage of the damaged fuse (30A x 2).
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.