Related Manuals for Philips TDA1015
Summary of Contents for Philips TDA1015
- Page 1 DATA SHEET TDA1015 1 to 4 W audio power amplifier Product specification File under Integrated Circuits, IC01 INTEGRATED CIRCUITS November 1982...
-
Page 2: Quick Reference Data
1 to 4 W audio power amplifier The TDA1015 is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4 very low applicable supply voltage of 3,6 V permits 6 V applications. - Page 3 Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 November 1982...
-
Page 4: Heatsink Design
Philips Semiconductors 1 to 4 W audio power amplifier RATINGS Limiting values in accordance with Absolute Maximum System (IEC 134) Supply voltage Peak output current Total power dissipation Storage temperature Operating ambient temperature A.C. short-circuit duration of load during sine-wave drive; V... - Page 5 Philips Semiconductors 1 to 4 W audio power amplifier D.C. CHARACTERISTICS Supply voltage range Repetitive peak output current Total quiescent current at V = 12 V A.C. CHARACTERISTICS = 25 C; V = 12 V; R = 4 ; f = 1 kHz unless otherwise specified; see also Fig.3.
- Page 6 Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 Notes 1. Measured with an ideal coupling capacitor to the speaker load. 2. Measured with a load resistor of 20 k . 3. Measured at P = 1 W; the frequency response is mainly determined by C1 and C3 for the low frequencies and by C4 for the high frequencies.
-
Page 7: Application Information
Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 APPLICATION INFORMATION Fig.4 Circuit diagram of a 1 to 4 W amplifier. Fig.5 Total quiescent current as a function of supply voltage. November 1982... - Page 8 Philips Semiconductors 1 to 4 W audio power amplifier Fig.6 Total harmonic distortion as a function of output power across R bootstrap; f = 1 kHz; typical values. The available output power is 5% higher when measured at pin 2 (due to series resistance of C10).
- Page 9 Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 Fig.8 Voltage gain as a function of frequency; P relative to 0 dB = 1 W; V = 12 V; R = 4 . Fig.9 Total harmonic distortion as a function of frequency; P = 1 W; V = 12 V;...
- Page 10 Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 Fig.10 Ripple rejection as a function of R2 (see Fig.4); R = 0; typical values. Fig.11 Noise output voltage as a function of R2 (see Fig.4); measured according to A-curve; capacitor C5 is adapted for obtaining a constant bandwidth.
- Page 11 Philips Semiconductors Product specification 1 to 4 W audio power amplifier TDA1015 Fig.12 Noise output voltage as a function of frequency; curve a: total amplifier; curve b: power amplifier; B = 5 kHz; R = 0; typical values. Fig.13 Voltage gain as a function of R2 (see Fig.4).
- Page 12 Philips Semiconductors 1 to 4 W audio power amplifier PACKAGE OUTLINE SIL9MPF: plastic single in-line medium power package with fin; 9 leads pin 1 index DIMENSIONS (mm are the original dimensions) UNIT max. 18.5 15.8 1.40 17.8 15.4 1.14 Note 1.
-
Page 13: Life Support Applications
Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.