Table of Contents
Advertisement
REFERENCE
Common Problem
No Power
Power turns itself off.
Play fails to start, even
when PLAY is pressed
Play commences but then
stops immediately
No picture
Picture is distorted during
rapid advance or reverse
No sound or distorted sound
No operations can be
performed with remote
DVD Problem
Subtitle and/or audio
language is not the one
No on-screen display
The menu is displayed in a
a foreign language.
Play doesn't begin when
a title is selected.
No rapid advance or reverse.
Disc won't play.
Forgot Rating Limit Password.
Cannot copy discs to videotape.
48
Solution
Insert the power plug securely into the outlet.
The power is automatically turned off after approx. 30 minutes have elapsed
in the stop mode (auto power-off feature). Turn power back on.
•
Ensure that the disc is installed with the label side facing up.
•
This player plays only DVD discs, Audio CDs and Video CDs.
•
The disc is dirty. Clean it.
•
Condensation has formed. allow player to dry out.
•
Ensure that the equipment is connected properly.
•
Turn on the TV's power.
•
Ensure that the input setting for the TV is correct.
The picture will be somewhat disturbed at these times: this is normal.
•
Ensure that the equipment is connected properly.
•
Ensure that the input settings and the volume adjustment for the TV
and stereo system are correct.
•
No sound is heard during still frame advance or slow-motion play
•
Check the batteries in the remote.
•
Operate the remote control at a distance of no more than 20 feet.
•
Remove any obstacles between the remote and the DVD player
Solution
If the subtitle and/or audio language does not exist on the disc, the
initial settings will not be seen/heard. The disc's priority language is selected
instead. Set the subtitle and or audio language initial setting manually.
The OFF setting is selected for OSD DISPLAY; select ON.
The MENU LANGUAGE preference is set to that language. Go to the
Setup menu and select the language you prefer.
The rating level has been set and the disc is subject to that restriction.
Some DVD discs have sections that prohibit rapid advance/reverse.
Both the player and the DVD is coded by region. If the regional codes don't
match, the disc cannot be played.
With the power on, press and hold the SKIP REV and PAUSE buttons, then
press POWER. This resets the password feature, as well as the Setup menu
settings.
You may be required to select a menu language the next time you power up.
This player is equipped with anticopy protection.
Advertisement
Table of Contents
