Table of Contents
Advertisement
PLAYING AUDIO CDS
Loading and Playing an Audio CD
Before you load a disc, make sure that it is compatible with
the player. Note that the following discs CANNOT be used
with this player:
•
Laserdisc
•
CD-I, CD-ROM, CD-R, DVD-ROM
•
Mini Disc
•
Discs recorded using other broadcast standards (i.e. PAL
or SECAM)
•
CD-G discs play audio only, not graphics
To Load and Play an Audio CD
Make sure that you have properly connected the DVD player
(see "Connections"), before you begin.
1.
Press the OPEN/CLOSE button on the front of the DVD
player.
2. Place a disc gently into the tray with the disc's label facing
up.
3. Press the PLAY button to close the disc tray.
The DVD player reads the disc's table of contents, and
then begins disc playback.
5. Press STOP to stop playback.
Audio CD Playback Features
When playing audio CDs, your DVD player has many of the
same features that your CD player has, including track skip,
repeat play, and programmed playback.
Skipping Tracks
•
To skip forward to the beginning of the next track on a CD,
press the SKIP FWD (
•
To skip backward to the beginning of the preceding track
on a CD, press the SKIP REV (
26
) button.
) button.
Insert with the label facing up.
Advertisement
Table of Contents
