Table of Contents
Advertisement
3
USB 3.0 connector with battery charging function
The USB 3.0 connector with battery charging function is used to do the following:
• Connecting USB devices (USB 1.0, USB 1.1, USB 2.0, and USB 3.0 compatible)
• Charging devices even when your notebook computer is turned off, in sleep mode, or in hibernation
mode; or when the dock is disconnected from your notebook computer
4
USB 3.0 connector
The USB 3.0 connector is used to connect USB devices (USB 1.0, USB 1.1, USB 2.0, and USB 3.0
compatible).
5
Security-lock slot
The security-lock slot is used to secure the dock with a security cable lock.
Note: The security cable lock is not included in your option package. If necessary, purchase a security
cable lock.
6
OneLink cable
The OneLink cable is used to connect the dock to your notebook computer.
Note: To avoid any fire damage, ensure that the notebook computer connecting the OneLink cable meets
either of the following requirements:
• The flammability of the notebook computer enclosure is not lower than Class V-1.
• The notebook computer enclosure is metallic.
7
Cable management stand
The cable management stand is used to manage the OneLink cable to optimize desk space.
8
Power connector
The power connector is used to connect the power adapter.
Note: The power input rating of the dock is 20 V and 3.25 A.
9
HDMI connector
The HDMI connector is used to connect an external HDMI monitor to the dock using an HDMI cable,
or to connect an external monitor with a Video Graphics Array (VGA) connector to the dock using an
HDMI-to-VGA adapter.
10
Gigabit Ethernet connector
The Gigabit Ethernet connector is used to connect the dock to a network using an Ethernet cable.
11
USB 2.0 connectors
The two USB 2.0 connectors are used to connect USB devices (USB 1.0, USB 1.1, and USB 2.0 compatible).
.
Chapter 1
About the dock
3
Advertisement
Table of Contents
