Table of Contents
Advertisement
Using the Gigabit Ethernet connector
To use the Gigabit Ethernet connector on the dock, connect the dock to a network using an Ethernet cable,
and wait until the dock is fully configured by the Windows operating system.
®
Note: The Gigabit Ethernet connector on the dock fully supports the ThinkVantage
Access Connections™
program.
Using the HDMI connector
The video output connector on the dock is a standard HDMI connector. To use the HDMI connector, connect
an external HDMI monitor to the dock using an HDMI cable. You also can connect an external monitor with a
VGA connector to the dock using the HDMI-to-VGA adapter that comes with the dock.
You can adjust video settings to customize the use of the dock. For more information, see Chapter 4
"Working with the dock" on page 9.
Note: For better performance, occasionally adjust the external monitor to realign its settings with the video
output of the dock. For more information about the adjustment procedure, refer to the documentation
that comes with your external monitor.
8
ThinkPad OneLink Dock User Guide
Advertisement
Table of Contents
