Toshiba teli SPS02 Instruction Manual page 20

Smart photo sensor
Table of Contents

Advertisement

EMC condition
Vibration Resistance
Shock Resistance
Dimensions
Mass (including 1meter cable)
Lend Mount
Notes on Heat Radiation:
The temperature of this product housing must be kept less than 60 ° C.
Please provide sufficient heat radiation depending on your installation.
Notes on Heat Radiation:
The power consumption differs from an SPS Application you write on in this product. When using the
SPS Application you arranged, please be sure about the influence of the heat under the condition and
the environment you use.
Notes on Conformity of the EMC:
The adaptability of the safety standard of this product is assured in the condition of combination with the
following parts:
-
USB Cable
-
USB Connector Adaptor
Please confirm the EMC compatibility of equipment and device.
Copyright © 2012 TOSHIBA TELI CORPORATION, All Rights reserved.
EMI
:EN61000-6-4、
FCC Part 15 Subpart B Class A
EMS
:EN61000-6-2
10~55Hz Double Amplitude 1.5mm
Two hours for each XYZ direction
2
500m/s
6direction For each three times
22(W) x 50(H) x 12(D)[mm] (not including protrusion)
About 56g
M17 P=0.75
U2C-MF20BK
(ELECOM Co., Ltd)
USA-MMC
(Miyoshi Co., Ltd)
18
D4213658C
http://www.toshiba-teli.co.jp/index.htm

Advertisement

Table of Contents
loading

Related Products for Toshiba teli SPS02

Table of Contents