Using Ac Or Dc Power - Radio Shack MICRO Owner's Manual

Caution: If you do not plan to use the re-
corder for several days, remove the bat-
tery. Batteries can leak chemicals that can
destroy electronic parts.

Using AC or DC Power

You can power the recorder from AC pow-
er using the supplied power adapter and
an AC adapter with a size A Adaptaplug™
(not supplied), or from a vehicle's battery
using the supplied power adapter and a
DC adapter with a size A Adaptaplug.
Both are available at your local Ra-
dioShack store.
Cautions:
You must use a Class 2 (for
!
AC power) power source
that supplies 3 volts DC
and delivers at least 200 mA. Its cen-
ter tip must be set to positive and its
plug must fit the recorder's power
adapter jack. Using an adapter that
does not meet these specifications
could damage the recorder or the
adapter.
• Always connect the adapter to the
recorder before you connect it to
power. When you finish, disconnect
10
Preparation