Dots Appear And Remain On The Screen; Cannot Shoot Images In Succession - Sony Cyber-shot DSC-W710 User Manual

Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening the image
under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [Auto] or [On].
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.

Dots appear and remain on the screen.

This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

The internal memory or memory card is full. Delete unnecessary images.
The battery level is low. Insert a charged battery pack.
The same image is shot several times.
Set [Cont. Shooting Settings] to [Single Shooting].
[Scene Recognition] is set to [Advanced] (DSC-W730).
Copyright 2012 Sony Corporation
171
[Details]
[Details]
[Details]
[Details] [Details]
Back to top